subaru legacy range enhanced with new es nav model
Subaru's Legacy Tourer, launched in 2009 gets a new addition to the family with the introduction of the new ES Nav.
easy–to-use puncture repair kit is supplied as part of Subaru’s vehicle weight reduction programme.
STRUCTURE AND SAFETY
‘Circular links’ enhance strength and occupant protection
As well as ‘new-look’ styling, larger dimensions and new suspension, the New Legacy Tourer has a completely reviewed and re-engineered bodyshell. The all-steel unitary structure is refined to enhance ride, handling and refinement, while also delivering the highest level of crash safety performance. The New Legacy Tourer was recently awarded a 5-Star Euro NCAP crash safety rating, confirming that Subaru’s structural and safety engineers have achieved their targets for this new model.
Newly developed, the bodyshell is both lighter and stiffer, featuring ring-shaped reinforcement frames – ‘circular links’ – joining the A, B, C and D-pillars with cross members at roof and floor level. This creates a series of ‘circular links’ which strongly protects the cabin occupants. Ultra-high-strength steel plate is used at key portions of the bodyshell to achieve strength without adding significantly to overall weight.
By fully exploiting the structural characteristics of the newly adopted sub-frame mounting system, the front body structure is redesigned to improve the rigidity of the front suspension installation and to enhance impact resistance as well as steering response. These improvements, and reinforcement of the engine bay bulkhead and toe board areas, were accomplished while also saving six kilogrammes from the front body panels.
The rear floor structure has also been optimised to accommodate the new sub-frame and to reduce weight while increasing rigidity, further improving rear suspension characteristics and vehicle drivability.
Delivering ‘5-Star’ crash safety protection
Using the advanced ring-shaped reinforcements throughout the New Legacy Tourer bodyshell enhances collision safety and resistance to impacts from all directions. In addition, the newly adopted ‘cradle mount’ sub-frame mounting system contributes to an enlarged front-end crush zone, further improving occupant protection and the Euro NCAP test performance.
During a front-end collision, the new front ‘cradle mount’ sub-frame deforms in a controlled manner and pushes the power unit downwards to the rear. As a result, the rearward movement of such a large mass dissipates impact energy and assists the efficient absorption of collision energy by the main body structure.
To enhance side-impact protection, ultra-high-strength steel plate is used for the B-pillar and side sill structures to improve the local cabin area rigidity. In addition, two door impact beams are placed within each front and rear door. By optimally positioning the beams in relation to the door’s internal structure, a sufficient crush space is ensured to minimise intrusion. Furthermore, a ‘door catcher’ is fitted to the bottom of the rear door to prevent it intruding into the cabin.
Despite the relatively short rear overhang, the New Legacy’s structure is optimised so that rear impact energy is efficiently absorbed by controlled and gradual crushing of the rear sub-frames.
To minimise repair costs after a low-speed frontal collision, new impact-absorbing crash boxes are provided behind the front bumper. Impacts of approximately 9 mph or less can be absorbed without affecting the main frame members. In addition, the crash boxes can be replaced separately, aiming at reducing repair costs, time and the amount of resources to be used. Each part of the radiator is attached by bolts, rather than welding, thus making parts replacement during repairing easier, quicker and cheaper. To achieve the same goal at the rear, a new bumper beam with an impact absorption feature has been adopted.
‘Passive’ safety advances that also benefit pedestrians
While a robust structure can form the foundation for a truly safe car, Subaru has also ensured that the New Legacy Tourer is comprehensively kitted out with a full range of both ‘passive’ and ‘active’ safety equipment – as the best way to prevent occupant injury is to overcome the hazards of daily motoring and avoid any accident in the first place.
The new front seats have significantly-increased frame and inner-structure stiffness to provide protection against whiplash injuries. New-design, energy-absorbing head restraints offer greater protection by reducing head impact forces.
Front dual, side and curtain airbags are fitted as standard on all models. The side and curtain airbags are enlarged for enhanced performance, and the airbag impact sensors have been upgraded to improve responses.
To protect the driver’s knee and lower leg, the steering column’s structure has been redesigned with an impact-absorption space, and a knee protector. All the foot pedals have a collapsible function (above a pre-set g-force) to reduce the likelihood of foot injuries.
New, impact-absorbing materials and an optimised structure around the front bumper have been designed to exceed the European next-generation pedestrian protection standards, which are the most stringent in the world. Although steel is used for the hood (to maximise protection of the car’s occupants), the impact-absorbing space beneath the hood and above the low boxer engine is enlarged, and the structure is improved around the body cowl to reduce possible injury to a pedestrian.
EQUIPMENT
Choice of three equipment levels for the New Legacy Tourer
The 2010 Subaru New Legacy Tourer is available in the UK with three trim/equipment levels, with on-the-road prices climbing by £2,000 with each equipment level over a £4,000 range.
Standard Equipment on S
Exterior
Body-coloured bumpers
Body-coloured door mirrors housings
Body-coloured door handles
Electric folding, heated door mirrors with LED indicators
HID head lamps with power washers and automatic self-leveling
Front fog lights
UV protected front, side and rear glass
Intermittent rear wash/wiper
Roof spoiler
16-inch alloy wheels with 205/60 R16 tyres
Powered glass tilt-n-slide sunroof with interior sunshade
Interior
Welcome lights front and rear
Fabric upholstery and trim
Tilt and telescopic steering wheel adjustment
Steering wheel mounted audio and cruise controls
Leather-wrapped steering and gear selector
10-way electrically adjustable driver’s seat
Adjustable lumbar support
Driver’s seatback storage pocket
Front passenger seatback storage pocket
Heated front seats
Driver and passenger illuminated vanity mirrors
Front map reading lights and cascade lighting
Electric windows front and rear
Adjustable dashboard illumination
Multi Information Display
Multi-function centre console with 12v power outlet
Front and rear cup-holders
60/40 spilt rear seat with centre armrest
Retractable luggage cover
Comfort and Convenience
Automatic dusk-sensing head lamps
Automatic rain-sensing wipers
Dual-zone automatic air-conditioning
Cruise control
Bluetooth connectivity
Eco driving ‘change-up’ indicator
Gear-in-use indicator
Six CD tuner with RDS and six speakers
Speed-adjusting automatic volume control
AUX input socket in centre console
Audible headlights on reminder
Remote fuel flap release
Hill start assist linked to VDC system
Safety
Front, front side and curtain air bags
Vehicle Dynamics Control stability system
Traction Control
ABS, EBD and EBA braking systems
AWD full-time all-wheel drive system
Electronic push/pull handbrake
Security
Remote central locking with deadlocks
High security integrated audio system
Locking wheel nuts
Window etching
Rolling code ECU immobiliser
Thatcham Category 1 alarm
Standard Equipment on SE
Additional items over S model
Sports Pack
18-inch alloy wheels with 225/45 R18 tyres
Bilstein dampers
Sports front bumper and front grille
Black head lamp housings
Aluminium foot pedals
Carbon-fibre effect interior trims
Leather upholstery and trim
10-way electrically adjustable driver’s seat with memory
Standard Equipment on SE NavPlus
Additional items over SE model
Smart Entry (keyless access)
Push button engine start/stop
DVD satellite navigation and audio system with Dolby Prologic II
On board computer
AUX video input
Rear view camera
MODEL HISTORY
Flagship models celebrates 20th Anniversary
This year, the Subaru Legacy celebrates its 20th anniversary. Throughout its four previous generations, Subaru’s unique technologies, such as the AWD (All-Wheel-Drive) system paired with the Horizontally-Opposed (‘Boxer’) engine, have delivered a very special blend of driving performance, comfort, durability and safety.
As a result, up to the end of 2008, Legacy production had reached a total of over 3.6 million units (including the Outback model), while receiving high praise from media and public.
Now, as Subaru’s flagship model, the fifth-generation Legacy has been developed to pursue new directions for Subaru, setting new values worthy of the brand, as well as acknowledging the proud heritage that successive Legacy models have established.
First generation (from 1989) Striving for a world-class vehicle, development started with a goal of refining the Subaru driving experience. Legacy received high praise from users. | ![]() |
Second generation (from 1993) The original concept was retained, while performance was further improved. Along with upgrades to handling and styling, AWD driving performance and practicality were enhanced. | ![]() |
Third generation (from 1998) Qualities as a driver’s car were pursued to the utmost. Aiming to establish a flagship for truly global brand, key qualities such as safety performance were further refined. | ![]() |
Fourth generation (from 2003) With a focus on ‘emotional performance’, the car was widened and the overall design renewed, inside and out. Weight was reduced, and significant attention was paid to driving performance and environmental friendliness. | ![]() |
TECHNICAL SPECIFICATIONS
New Subaru Legacy Tourer
Body and Chassis
Five-door, five-seater estate, with all-steel unitary construction bodyshell. Choice of two longitudinally-mounted diesel and petrol boxer engines driving the front and rear wheels (AWD) via a six-speed manual or six-speed Lineartronic transmission – depending on model.
Engines
2.0-litre / 150 ps Diesel
Name Subaru Boxer Diesel
Type DOHC, horizontally opposed ‘flat four’, with VGT
Capacity 2.0-litres, 1,998 cc
Bore & Stroke 86.0 x 86.0 mm
Compression ratio 16.0:1
Max power 150 ps (110 kW) @ 3,600 rpm
Max torque 350 Nm (258.2 lbf.ft) @ 1,800-2.400 rpm
Valves 16 (4-per-cylinder)
Fuel system CRDi, common-rail, high pressure, direct injection
Turbo system Variable geometry turbocharger (VGT)
Construction Aluminium cylinder block and aluminium heads
Emissions class Euro Stage 5
2.5-litre / 167 ps Petrol
Name Subaru Boxer
Type SOHC, horizontally opposed ‘flat four’
Capacity 2.5-litres, 2,457 cc
Bore & Stroke 99.5 x 79.0 mm
Compression ratio 10.0:1
Max power 167 ps (123 kW) @ 5,600 rpm
Max torque 229 Nm (168.9 lbf.ft) @ 4,000 rpm
Valves 16 (4-per-cylinder)
Fuel system Multi-point injection
Construction Aluminium cylinder block and heads
Emissions class Euro Stage 5
Transmissions
2.0D 2.5i
Manual 6-sp -----
Automatic ----- Lineartronic
Gear Ratios
2.0D 2.5i
1 3.454:1 3.525:1
2 1.750:1 |
3 1.062:1 |
4 0.785:1 |
5 0.634:1 |
6 0.557:1 0.558:1
Reverse 3.636:1 2.358:1
Final Drive 1 4.111:1 3.700:1
Drivetrains
2.0D AWD with centre differential coupled to viscous LSD
2.5i AWD with active torque split system
Suspension & Damping
Front Fully independent by subframe-mounted MacPherson Struts, with coil springs and gas-filled shock absorbers. Anti-roll stabiliser bar.
Rear Fully independent by subframe-mounted Double Wishbones, coil springs and gas-filled shock absorbers, with self-levelling system (available on Outback only).
Steering
Type Electric power-assisted rack & pinion
Wheel 375 mm diameter, three-spoke leather trimmed.
Gearing 2.8 turns lock-to-lock
Turning circle 11.0 metres
Wheels & Tyres
2.0D S Alloy 16 in x 6.5J 205/60 R16 tyres
2.0D SE Alloy 18 in x 7.5J 225/45 R18 tyres
2.5i SE Alloy 18 in x 7.5J 225/45 R18 tyres
Spare (all models) Tyre mobility kit
DIMENSIONS (mm)
Exterior
Overall length 4775 Overall width 2052/1780*
Overall height 1535 Wheelbase 2750
Front track 1540 Rear track 1540
Front overhang 960 Rear overhang 1065
Ground clearance 150 *including/excluding door mirrors
Interior
Front Rear
Headroom 1024 951
Legroom 1091 960
Shoulder room 1430 1426
Hip room 1384 1370
Capacities (all models)
Fuel tank 65 litres
Luggage (VDA) 526 litres behind 2nd row seats
1677 litres behind 1st row seats
Weights (kg)
2.0D 2.5i
Curb weight (min.) 1558 1526
Gross weight 2075 2030
Towing (max) kg* 750 750 (unbraked trailer)
1700 1800 (braked trailer)
Performance
2.0D 2.5i
Top speed / mph 120 120
0-to-62 mph / sec 9.6 10.3
Fuel Economy (mpg)
2.0D 2.5i
Combined cycle 46.3 33.6
CO2 g/km 161 196
All-new Legacy celebrates model’s 20th Anniversary
In 2009, the Subaru Legacy celebrated its 20th anniversary as the brand’s flagship model. Across two decades and through four previous generations, Subaru’s unique technologies in the Legacy – such as the Symmetrical AWD (All-Wheel-Drive) system paired with the Horizontally-Opposed (Subaru Boxer) engine – have delivered a very special blend of driving performance, comfort, durability and safety.
That special blend has won the ardent loyalty of thousands of owners around the world, high praise from media and achieved sales of more than 3.6 million units (including the Outback sibling model), to the end of 2008.
Now, the fifth generation all-new Legacy is introduced. Broadening its appeal, Subaru’s top model offers consumers and business drivers a more stylish appearance, increased comfort for all occupants, enhanced refinement, and improved safety. It does this while retaining the balanced performance and rewarding handling that Legacy drivers have come to relish, as well as acknowledging the proud heritage that successive models have established.
Subaru’s design team followed the key theme of ‘Presence’ when creating the New Legacy – exploiting the all-new platform to evolve recognisable Legacy characteristics, with a touch more authority and bolder treatments for the grille and headlamps. The significantly increased dimensions, including an 80 mm longer wheelbase, enabled designers to sculpt a Legacy Tourer with a much bolder stance and greatly heightened on-road presence.
As well as ‘new-look’ styling, the New Legacy Tourer has a completely re-engineered all-steel unitary structure that delivers the highest crash safety performance. The vehicle was recently awarded a 5-Star Euro NCAP crash safety rating.
With the introduction of the 2010 models, Subaru has revised the Legacy product line-up in the UK. It will market five versions of the New Legacy Tourer, with a choice of diesel or petrol engines and three trim/equipment levels – depending on model. New Legacy Tourer prices start at £24,795 and cover a £5,000 range. Each model is so comprehensively equipped that the only factory-fitted option will be special paint finishes, priced at £430.
Beneath the ‘new-look’ exterior, refinement and safety are boosted by mounting the engine and the front and rear suspension systems on a ’cradle mount’ sub-frame. The rear suspension is an all-new, more compact design that facilitates much increased cargo bay capacity – up by 67 litres to 526 litres, with the rear seats upright.
While the diesel New Legacy comes exclusively with a six-speed manual gearbox, all petrol models are fitted with Subaru’s all-new ‘Lineartronic’ transmission which has been developed in-house. Both the diesel and petrol engines are Euro 5 compliant for emissions.
The New Legacy Tourer is longer, wider and taller than the previous model. This growth, together with the longer wheelbase, results in greater head, leg and shoulder room.
Building on the premium ambience created by the new exterior and interior styling, plus the enhanced and generous cabin space, the New Legacy is comprehensively equipped to ensure maximum comfort for all occupants. All models feature cruise control; an electric sunroof; dual-zone, fully automatic air-conditioning; a premium audio system with six speakers; automatic lights and wipers and a powered driver’s seat. The audio system is MP3 compatible and a Bluetooth* hands-free system is fitted as standard.
The five-strong range of New Legacy Tourer models starts with the 2.0-litre diesel S model and encompasses two SE models (diesel and petrol) for an extra £2,200 and is completed by two SE NavPlus models (diesel and petrol) which carry an additional £2,300 premium.
2010 New Legacy Tourer
Model Price CO2 VED Insurance P11D
(OTR) g/km Band Group Value
2.0D S £24,795 161 G 11E/20E £24,585
2.0D SE £26,995 168 H 12E/21E £26,690
2.0D SE NavPlus £29,295 168 H 12E/21E £28,990
2.5i SE** £26,995 196 J 11E/20E £26,515
2.5i SE NavPlus** £29,295 196 J 12E/21E £28,815
**with Lineartronic transmission as standard
* Bluetooth is a registered trademark of BluetoothSIG, Inc. USA.
STYLING AND DESIGN
A bolder stance and heightened road presence
While creating the fifth-generation Legacy, Subaru’s design team followed the key theme of ‘Presence’ – exploiting the all-new platform to evolve recognisable Legacy characteristics, with a touch more authority and bolder treatments for stand-out frontal features such as the grille and headlamps.
The significantly increased length, longer wheelbase and wider track enabled designers to sculpt a New Legacy Tourer with a much bolder stance and greatly heightened on-road presence that also hints at Subaru’s core technology – Symmetrical All-Wheel Drive (AWD) – which remains at the heart of this newcomer.
The headlight units are larger and stretched longitudinally, while the three-dimensional aspect of their internal components layout is highlighted to give ‘technology’ feel. A new front grille design incorporates the ‘wing motif’ that is a shared feature of the Subaru family of vehicles, enabling the face of the New Legacy Tourer to make a powerful statement.
Prominently-projecting wheelarches express the power running through the AWD system. The lower body is designed with minimum character lines to emphasize strength and stability. By contrast, there are strong flowing lines above the belt-line and chrome-plated mouldings around the side glass-house edges. These not only enhance the cabin presence, but also combine to create a premium look.
For the New Legacy Tourer, a new design approach with a visible D-pillar (viewed from outside), has been adopted. The new design offers a sense of evolution and the D-pillars, rear lamp clusters and rear bumper hint that this car benefits from driven rear wheels.
Overall, the exterior of New Legacy boasts a three-dimensional solidity that expresses a new type of sportiness. In the UK, a choice of six exterior body colours will be available, with four new colours – Satin White, Galaxy Blue Silica, Crystal Black Silica and Graphite Gray Metallic – on offer, alongside popular carry-over colours, Steel Silver Metallic and Camellia Red Pearl.
More space, more comfort plus easy functionality
Naturally, the cabin design of the New Legacy reflects the dynamic subtleties of the exterior. The design team’s key mantra was “Active and Quality Feeling” and while exploiting the enhanced cabin space available within the new bodyshell, it paid particular attention to detail to ensure easy-to-use functionality, for the driver and passengers and maximum comfort for extended journeys. Double-seals on all doors and windows enhance refinement by reducing the intrusion of wind noise.
The all-new, larger front seats offer excellent comfort and support, with 10-way power adjustment on the driver’s seat (including lumbar support), and four-way manual adjustment on the passenger seat. The front seats feature 20% softer cushions and 10% softer backrests.
The driver’s seat benefits from more adjustability, with a 10 mm increase in fore/aft slide range, 20 mm more height movement, a two degree increase in cushion tilt and now a 20 mm lumbar adjustment. Rear seats passengers are also offered enhanced comfort, with the 60/40 split backrest which will recline over a 20 degree range.
Facing the driver, a new instrument cluster features four dials outlined in aluminium rings, and the new three-spoke steering wheel is leather-wrapped, with integrated audio and cruise controls, and a wider range of adjustment – 40 mm for both reach and rake. On Lineartronic models, steering column-mounted paddle shifters are fitted for sequential manual control of the gearbox.
In the UK, the 2.0 D S model features black cloth seat upholstery and interior trim, while all the SE models are trimmed in black leather.
Exterior Dimensions, Comparisons (mm)
New Legacy Difference Previous Legacy
Length 4775 +55 4720
Width 2052 ----- ----
(excluding mirrors) 1780 +50 1730
Height 1535 +65 1470
Wheelbase 2750 +80 2670
Front track 1540 +45 1495
Rear track 1540 +55 1485
COMFORT AND CONVENIENCE
Refined and exceedingly luxurious, without excess
Building on the premium ambience created by the new exterior and interior styling, plus the enhanced and generous cabin space, the New Legacy Tourer is comprehensively equipped to ensure maximum comfort for all occupants.
All models feature dual-zone, fully automatic air-conditioning with an anti-dust filter and heating ducts to the rear passenger footwells. A premium audio system, with a radio/CD player, six speakers (including two tweeters) and steering wheel-mounted remote controls, is standard. For the New Legacy Tourer, radio reception has been significantly improved by the fitting of two high performance antennae within the rear window glass.
The audio systems are MP3 compatible and a Bluetooth hands-free system is fitted as standard. Voice activation from the hands-free microphone allows users to make phone calls, specify navigation destinations and operate the audio appliances.
Facing the New Legacy Tourer driver, the new instrument panel integrates clarity, functionality and a visual richness in keeping with the premium character of the new model. Four dials are ringed in aluminium and feature an additional liquid crystal display panel in the centre. The dials and the display are illuminated constantly, even in daytime, to improve visibility. The dials appear white with the ignition off and turn light blue with the ignition on. When the ignition is switched on, the gauge needles sweep to the maximum position and then quickly return to zero – heightening the excitement and anticipation of the journey to come. For diesel models, a glow indicator, fuel sedimenter warning light and diesel particulate filter warning light are added.
The new Multi-Information Display (MID) is positioned on the centre stack’s upper surface so that it can be viewed from all seats. The MID shows ambient temperature, fuel consumption information (instantaneous fuel efficiency, average fuel efficiency, driving range to empty), passenger seatbelt warning lights and a digital clock.
Major controls in the New Legacy Tourer are laid out to minimise both the intrusion into the driver’s line of sight and the time the driver’s hands are away from the steering wheel. Minor controls and switches are positioned to optimise ease-of-use. Models with the new Lineartronic transmission feature a compact gear selector and a straight-line selector gate for ease of operation. To exploit this transmission’s manual mode, steering wheel mounted paddle-shifters are standard on these models.
Depending on model, equipment available as standard on the New Legacy Tourer includes: automatic operation of headlamps and windscreen wipers, front and rear electric windows (with auto up/down function on the driver’s door), a glass ‘tilt-n-slide’ sunroof, keyless access (Smart Entry) by the key ‘owner’ simply touching the sensor on the front door handle, and push button engine Start/Stop without inserting a key.
SE and SE NavPlus models feature a ‘Sports Package’ which comprises a sports front bumper and front grille, dark tinted head lamps, larger 18-inch alloy wheels and special Bilstein dampers. Inside, there are aluminium foot pedals and carbon fibre-effect trim panels.
The range-topping SE NavPlus models also feature a new DVD navigation system as standard, with a high-resolution, wide VGA, eight-inch monitor, high-speed 600 MHz CPU and LED back-lit display for optimum clarity and practicality.
These models are also equipped with a Rear View Camera (RVC). The RVC superimposes graduated guide lines on the camera image to show the width of the vehicle and distance to objects behind to greatly aid the driver during reversing and parking manoeuvres.
PRACTICALITY
Extra room to enjoy the added comfort
The cabin of the New Legacy Tourer is longer, wider and taller than that of its predecessor, facilitating improvements in comfort and practicality. The interior also demonstrates lessons learned in Subaru’s latest ‘packaging innovation’ research programme.
Larger seats are fitted to make best-use of the increased space around each occupant. The space between the front seats has increased by 30 mm and the between the front and rear seats is increased by 62 mm. The rear seat backrest is split 60/40 and folds flat to offer the best people/cargo carrying versatility. With the rear seats upright, cargo capacity is increased by 67 litres to 526 litres.
Larger rear doors result in improved access to the rear seats, and detailed attention to the window shapes and pillar layouts ensures a greater feeling of ‘openness’ for the rear seat occupants in the New Legacy Tourer.
While the width and height of the luggage bay were increased, the depth of the lip between the rear bumper and cargo was reduced slightly to ensure it is easier for users to load and unload heavy items when lifting them into the interior. The tailgate, which is 33mm wider and 45mm taller than before for easier access, features an electromagnetic switch for easy opening with a light touch, aided by twin supporting gas struts.
The new front seats have concave backrests to provide extra knee space for rear seat occupants. The rear seat features a folding centre armrest with twin cup holders, and the backrests can be reclined for greater comfort during long journeys. A remote one-touch mechanism conveniently located in the cargo bay side panel enables the backrests to be folded flat in one simple operation from the rear tailgate when loading long items.
Inside the New Legacy Tourer, designers also paid attention to create generously sized, easy-to-use storage space for smaller items – with capacity increased by 39 litres over the previous model.
A larger glovebox will accept 31 CDs, while the new double-decker centre console, which can accommodate 22 CDs, incorporates a 12V power supply and AUX audio input socket. Two types of armrest console lid are provided, depending on the transmission type. A ‘low’ type is fitted to six-speed manual models, while a ‘tall’ type is used for the Lineartronic cars to ensure a relaxing driving posture.
Two cup-holders are provided alongside the centre console, while a 500 ml plastic bottle can be stored in all door pockets. A 50 mm thick box of tissues can also be accommodated in the front door pockets. A central overhead console is provided for storage of sunglasses and small items.
Interior Dimensions, Comparisons (mm)
New Legacy Difference Previous Legacy
Headroom (front) 1024 +21 1003
(rear) 951 +24 927
Legroom (front) 1091 - 29 1120
(rear) 960 +99 861
Shoulder room (front) 1430 +53 1377
(rear) 1426 +62 1364
Hip room (front) 1384 +89 1295
(rear) 1370 +34 1336
Cargo sp. (seats up) 526 +67 459 litres
(seats folded) 1726 ----- -----
Cargo width 1090 +15 1075
Cargo height 815 +5 810
Cargo depth* 1070 -20 1090
*length front-to-rear
ENGINES
Choice of high-power diesel or petrol ‘Boxer’ units
For the New Legacy Tourer line-up in the UK, customers will be offered a choice of 2.0-litre diesel and 2.5-litre petrol engines. The 150 ps diesel is expected to prove the most popular choice.
In March 2008, Subaru introduced the ‘Boxer Diesel’, the world’s first horizontally-opposed diesel engine for volume-produced passenger cars. The 1,998 cc diesel produces a maximum output of 150 ps and maximum torque of 350 Nm between 1,800 and 2,400 rpm.
Now, for the 2010 New Legacy Tourer, this unique engine benefits from several technical refinements and enhanced environmentally-friendly features. The shape of the piston crowns has been changed for a wider, shallower design. This, in conjunction with improvements made to gas flow within the combustion chamber have improved combustion efficiency and reduced the production of particulate matter. A ‘lift sensor’ has been added to the variable nozzle turbocharger for more precise control of the vanes.
The glow plugs have been changed from a metallic type to a ceramic type, raising the maximum operating temperature and providing better start-up at cold temperatures.
Control of the fuel injection has been optimised and the intake manifold has been redesigned in resin for improved airflow for improved torque characteristics and fuel efficiency. An added benefit of the new resin construction is the 1.5kg weight reduction over the previous aluminium version.
A single exhaust silencer has been used to optimise engine output and noise levels, while also saving weight. The addition of a vibration absorbing structure in the middle of main exhaust pipe also reduces noise levels.
The Subaru Boxer Diesel is fitted with a closed-type diesel particulate filter (DPF) that features a honeycomb shaped filter made of silicon carbide. The DPF, which is positioned low down with the turbocharger to maintain the car’s low centre of gravity, improves engine combustion efficiency and reduces particulate matter in the exhaust, further enhancing environmental friendliness.
And finally, the exhaust gas recirculator (EGR) cooler has been enlarged to improve the system’s efficiency by 12% – lowering NOx emissions to ensure that the New Legacy complies with Euro 5 exhaust gas regulations.
On the road, New Legacy delivers class-competitive performance. Top speed for the Legacy Tourer 2.0D S is 120 mph with a 0-to-62 mph time of 9.6 seconds. Fuel economy is an outstanding 46.3 mpg (combined cycle) and its CO2 emission figure is a highly competitive 161 g/km.
167 ps power unit for drivers who prefer a petrol engine
For drivers who prefer a petrol engine, Subaru’s famous horizontally-opposed, four-cylinder boxer engine is available in its 2.5i form. This 2.5-litre unit, with 16-valves and a displacement of 2,457 cc, generates a maximum output of 167 ps and torque of 229 Nm at 4,000 rpm.
The engine’s generous torque and flat torque curve ensures responsive performance from low speeds and a rewarding feeling of smooth acceleration. The cylinder heads have been modified and lighter pistons are used. Weight-saving new resin-type intake manifolds and internal friction reduction measures improve fuel efficiency, while the port shapes are modified and the catalytic converter structure is uprated, to comply with Euro 5 emissions regulations.
By adopting the i-Active Valve Lift System (i-AVLS), combined with the newly developed Lineartronic automatic transmission, fuel economy has been reduced towards the level equivalent to a 2.0-litre engine – recording a 3.3% improvement when compared with the previous automatic model. This is particularly impressive given that the new Legacy weighs 48kg more than the outgoing model.
Performance figures for the Legacy Tourer 2.5i SE Lineartronic highlight its unique blend of driving fun and moderate ownership costs. Top speed for this automatic transmission model is 120 mph with a 0-60 mph time of 10.3 seconds. Fuel economy is 33.6 mpg (combined cycle) and its CO2 emission figure is 196 g/km.
TRANSMISSIONS AND DRIVETRAINS
Innovative ‘Lineartronic’ offers sequential manual mode
As part of Subaru’s comprehensive re-engineering programme for New Legacy, the latest model offers buyers of the 2.5i petrol versions an all-new ‘next generation’ transmission system – the innovative, in-house developed ‘Lineartronic’.
Mounted longitudinally behind the boxer engine, ‘Lineartronic’ is a fully automatic continuously variable transmission-type unit that enables the engine to operate continuously at the most efficient part of its rev-range – resulting in strong, linear, seamless acceleration and maximised fuel economy.
Instead of an ordinary belt, Subaru’s new transmission employs a flat steel chain for the torque transfer mechanism between the system’s two pulleys to achieve a 97% transfer efficiency in a very compact unit.
The new transmission’s compact size allowed Subaru to increase the difference between the minimum and maximum pulley diameters, for a 6.3 ratio coverage that contributes to improvements in both engine performance and fuel efficiency. A straight, four-position shift gate ensures simple, easy-to-use operation in fully-automatic mode.
A six-speed manual mode is also available for greater driver involvement. Electronics provide six gear ‘steps’ and the driver can select the next gear sequentially (going up or down the box) by using the paddles attached to the steering wheel, to enjoy truly sporty and responsive driving. ‘Gear’ change time in manual mode is just 90 milliseconds.
Smooth-shifting six-speed manuals
Standard transmission for 2.0-litre diesel models is a new manual six-speed unit. This compact transmission is the same length as the previous five-speed unit and weighs just five kilos more.
Improvements featured in the new transmission include a cable-type linkage and a carbon synchronizer for the first and second ratios, constantly-engaged synchromesh for reverse gear, to improve the shift feel and optimised lubrication paths for reduced friction losses. The broader ratio coverage provide by the six-speed unit delivers better fuel economy, plus improved drivability and quietness at higher speeds.
Full-time ‘Symmetrical’ AWD – the Subaru hallmark
While numerous aspects of the New Legacy Tourer are indeed ‘all-new’, the Symmetrical AWD (All-Wheel-Drive) system is carried over, giving the new model all the traction advantages for which the Subaru brand is famous.
This is an evolution of Subaru's original full-time AWD system, which has a well-proven ability to provide real driving pleasure, superior driving performance and long-term reliability. For the system in the New Legacy Tourer, two different types of centre differential mechanism, a core feature of AWD, are provided – depending on model.
For the 2.0D models, four-wheel drive is delivered by a ‘Centre differential AWD with viscous LSD’ system. This combines a bevel-gear-type centre differential with the basic 50/50% front/rear, torque distribution and a viscous coupling limited slip differential. When a front wheel or rear wheel slips, the viscous coupling raises the torque distribution to other wheels to ensure optimum traction.
The 2.5i ‘Lineartronic’ models feature ‘Active torque split AWD’. This system constantly monitors the VDC (Vehicle Dynamics Control) and front/rear torque distribution, making adjustments according to sudden changes on the road surface. During normal driving, the torque distribution which achieves the best fuel economy is used.
For maximum driving safety, all models are equipped with Subaru’s Vehicle Dynamics Control (VDC) system. This is an electronic stability control programme (ESC) that closely monitors vehicle behaviour and automatically corrects excessive understeer and oversteer, by braking individual wheels and/or reducing engine power, to ensure that vehicle follows the course intended by the driver, ensuring maximum safety.
Powertrain comparisons
Engine Transmission Power (ps) Torque (Nm) Mpg* / CO2
2.0 Diesel Six-sp manual 150 350 46.3 / 161
2.5 Petrol Lineartronic 167 229 33.6 / 196
*combined cycle
RUNNING GEAR
New suspension, sub-frames and power steering
Following the strong traditional of the ‘Subaru Dynamic Chassis Control Concept’, engineers devised and developed the chassis and running gear for the New Legacy Tourer to feature many new and updated components. Their aim was to create a new Subaru that was exceptionally comfortable and safe to drive for long periods, and over many years of ownership, while also guaranteeing good drivability, high performance and genuine motoring pleasure.
To reduce noise, vibrations and harshness (NVH), and to enhance ride comfort, the engine mounting structure has been entirely renewed, for the first time since the Subaru 1000 model of 1966. An all-new ‘Cradle Mount System’ was adopted where the engine and transmission are mounted on a sub-frame – rather than directly to the bodyshell. This system brings numerous benefits.
The sub-frame is attached to the bodyshell using rubber bushes, especially tuned to dampen different frequencies of vibrations generated by the engine, transmission and suspension. For example, the main cushion rubber uses a liquid-filled type of bush, and the engine is supported on the subframe at four widely-spread points.
In addition, the front suspension and the power steering are mounted on the sub-frame, so that potential vibrations from the road surface are not easily transferred to the bodyshell or the car’s occupants – improving ride comfort and refinement.
New front and rear suspensions
For the New Legacy Tourer, Subaru has adopted a revised MacPherson strut front suspension, with the lower arm mounted on the sub-frame for greater stability. Steering response is enhanced, and quietness is increased by reducing vibrations. The thickness of the stabiliser (anti-roll) bar is increased, improving roll stiffness without requiring a change to the main spring rates. Roadholding during cornering is enhanced (thanks in part to a wider track), while smooth ride comfort is retained with extended wheel travel and optimised geometry.
At the rear, new ‘short height’ compact double-wishbone suspension is used to minimise intrusion into the cabin or cargo space. For maximum refinement, all the suspension links and the rear differential are installed on a new sub-frame. Large bushes are used between the sub-frame and the bodyshell to minimise transfer of NVH.
To achieve an ideal ride/handling balance, new low-friction type dampers are fitted on all models, front and rear. These dampers are tuned exclusively to match the characteristics of the New Legacy S model’s standard 16-inch wheels and tyres, ensuring a sense of ‘solidity and stability’ in fast driving, without loss of smoothness. SE and SE NavPlus models are fitted with special uprated Bilstein dampers as part of the Sports Pack, offering enhanced body control.
Electric power steering for improved fuel economy
In order to improve both steering feel and fuel economy, a new rack-and-pinion steering system with electric power assistance has been adopted. The system is mounted on the front cradle frame at four points, which increases rigidity of the steering system, and enhances its initial response to driver inputs. For the majority of the New Legacy Tourer models, a ‘quick ratio’ is used for increased sporty feeling.
New electronic parking brake and hill-hold function
The all-disc braking system, with ABS and EBD (Electric Brake-force Distribution) as standard, has a linear feel with retardation corresponding closely to applied brake pedal pressure. A redesigned master cylinder gives a 30% faster response to driver inputs on the brake pedal. Brake Assist is also standard, developing maximum stopping power automatically when the system detects emergency application of the brakes.
For the New Legacy Tourer, an innovative electronic parking brake is used. Controlled by a dashboard mounted switch, the new system does away with the traditional hand brake, freeing up cabin space and allowing a cleaner, less cluttered centre console design. If the doors are closed and the driver’s seatbelt is fastened then the parking brake will automatically release when the driver operates the accelerator pedal.
The new braking system also introduces a ‘Hill-Hold’ function. When the vehicle is stopped on a slope of 5% or more this feature will hold the vehicle on the brakes for one second after the driver removes their foot from the clutch – long enough to move it to the accelerator without rolling back; a feature that is particularly useful when towing.
Wheels and Tyres
The standard wheel and tyre combination for the New Legacy Tourer 2.0D S is a 16-inch alloy wheel with 205/60 R16 tyre. SE and SE NavPlus models feature 18-inch alloys with 225/45 R18 tyres. On all models, a conventional ‘spare wheel’ is not fitted, instead an
easy–to-use puncture repair kit is supplied as part of Subaru’s vehicle weight reduction programme.
STRUCTURE AND SAFETY
‘Circular links’ enhance strength and occupant protection
As well as ‘new-look’ styling, larger dimensions and new suspension, the New Legacy Tourer has a completely reviewed and re-engineered bodyshell. The all-steel unitary structure is refined to enhance ride, handling and refinement, while also delivering the highest level of crash safety performance. The New Legacy Tourer was recently awarded a 5-Star Euro NCAP crash safety rating, confirming that Subaru’s structural and safety engineers have achieved their targets for this new model.
Newly developed, the bodyshell is both lighter and stiffer, featuring ring-shaped reinforcement frames – ‘circular links’ – joining the A, B, C and D-pillars with cross members at roof and floor level. This creates a series of ‘circular links’ which strongly protects the cabin occupants. Ultra-high-strength steel plate is used at key portions of the bodyshell to achieve strength without adding significantly to overall weight.
By fully exploiting the structural characteristics of the newly adopted sub-frame mounting system, the front body structure is redesigned to improve the rigidity of the front suspension installation and to enhance impact resistance as well as steering response. These improvements, and reinforcement of the engine bay bulkhead and toe board areas, were accomplished while also saving six kilogrammes from the front body panels.
The rear floor structure has also been optimised to accommodate the new sub-frame and to reduce weight while increasing rigidity, further improving rear suspension characteristics and vehicle drivability.
Delivering ‘5-Star’ crash safety protection
Using the advanced ring-shaped reinforcements throughout the New Legacy Tourer bodyshell enhances collision safety and resistance to impacts from all directions. In addition, the newly adopted ‘cradle mount’ sub-frame mounting system contributes to an enlarged front-end crush zone, further improving occupant protection and the Euro NCAP test performance.
During a front-end collision, the new front ‘cradle mount’ sub-frame deforms in a controlled manner and pushes the power unit downwards to the rear. As a result, the rearward movement of such a large mass dissipates impact energy and assists the efficient absorption of collision energy by the main body structure.
To enhance side-impact protection, ultra-high-strength steel plate is used for the B-pillar and side sill structures to improve the local cabin area rigidity. In addition, two door impact beams are placed within each front and rear door. By optimally positioning the beams in relation to the door’s internal structure, a sufficient crush space is ensured to minimise intrusion. Furthermore, a ‘door catcher’ is fitted to the bottom of the rear door to prevent it intruding into the cabin.
Despite the relatively short rear overhang, the New Legacy’s structure is optimised so that rear impact energy is efficiently absorbed by controlled and gradual crushing of the rear sub-frames.
To minimise repair costs after a low-speed frontal collision, new impact-absorbing crash boxes are provided behind the front bumper. Impacts of approximately 9 mph or less can be absorbed without affecting the main frame members. In addition, the crash boxes can be replaced separately, aiming at reducing repair costs, time and the amount of resources to be used. Each part of the radiator is attached by bolts, rather than welding, thus making parts replacement during repairing easier, quicker and cheaper. To achieve the same goal at the rear, a new bumper beam with an impact absorption feature has been adopted.
‘Passive’ safety advances that also benefit pedestrians
While a robust structure can form the foundation for a truly safe car, Subaru has also ensured that the New Legacy Tourer is comprehensively kitted out with a full range of both ‘passive’ and ‘active’ safety equipment – as the best way to prevent occupant injury is to overcome the hazards of daily motoring and avoid any accident in the first place.
The new front seats have significantly-increased frame and inner-structure stiffness to provide protection against whiplash injuries. New-design, energy-absorbing head restraints offer greater protection by reducing head impact forces.
Front dual, side and curtain airbags are fitted as standard on all models. The side and curtain airbags are enlarged for enhanced performance, and the airbag impact sensors have been upgraded to improve responses.
To protect the driver’s knee and lower leg, the steering column’s structure has been redesigned with an impact-absorption space, and a knee protector. All the foot pedals have a collapsible function (above a pre-set g-force) to reduce the likelihood of foot injuries.
New, impact-absorbing materials and an optimised structure around the front bumper have been designed to exceed the European next-generation pedestrian protection standards, which are the most stringent in the world. Although steel is used for the hood (to maximise protection of the car’s occupants), the impact-absorbing space beneath the hood and above the low boxer engine is enlarged, and the structure is improved around the body cowl to reduce possible injury to a pedestrian.
EQUIPMENT
Choice of three equipment levels for the New Legacy Tourer
The 2010 Subaru New Legacy Tourer is available in the UK with three trim/equipment levels, with on-the-road prices climbing by £2,000 with each equipment level over a £4,000 range.
Standard Equipment on S
Exterior
Body-coloured bumpers
Body-coloured door mirrors housings
Body-coloured door handles
Electric folding, heated door mirrors with LED indicators
HID head lamps with power washers and automatic self-leveling
Front fog lights
UV protected front, side and rear glass
Intermittent rear wash/wiper
Roof spoiler
16-inch alloy wheels with 205/60 R16 tyres
Powered glass tilt-n-slide sunroof with interior sunshade
Interior
Welcome lights front and rear
Fabric upholstery and trim
Tilt and telescopic steering wheel adjustment
Steering wheel mounted audio and cruise controls
Leather-wrapped steering and gear selector
10-way electrically adjustable driver’s seat
Adjustable lumbar support
Driver’s seatback storage pocket
Front passenger seatback storage pocket
Heated front seats
Driver and passenger illuminated vanity mirrors
Front map reading lights and cascade lighting
Electric windows front and rear
Adjustable dashboard illumination
Multi Information Display
Multi-function centre console with 12v power outlet
Front and rear cup-holders
60/40 spilt rear seat with centre armrest
Retractable luggage cover
Comfort and Convenience
Automatic dusk-sensing head lamps
Automatic rain-sensing wipers
Dual-zone automatic air-conditioning
Cruise control
Bluetooth connectivity
Eco driving ‘change-up’ indicator
Gear-in-use indicator
Six CD tuner with RDS and six speakers
Speed-adjusting automatic volume control
AUX input socket in centre console
Audible headlights on reminder
Remote fuel flap release
Hill start assist linked to VDC system
Safety
Front, front side and curtain air bags
Vehicle Dynamics Control stability system
Traction Control
ABS, EBD and EBA braking systems
AWD full-time all-wheel drive system
Electronic push/pull handbrake
Security
Remote central locking with deadlocks
High security integrated audio system
Locking wheel nuts
Window etching
Rolling code ECU immobiliser
Thatcham Category 1 alarm
Standard Equipment on SE
Additional items over S model
Sports Pack
18-inch alloy wheels with 225/45 R18 tyres
Bilstein dampers
Sports front bumper and front grille
Black head lamp housings
Aluminium foot pedals
Carbon-fibre effect interior trims
Leather upholstery and trim
10-way electrically adjustable driver’s seat with memory
Standard Equipment on SE NavPlus
Additional items over SE model
Smart Entry (keyless access)
Push button engine start/stop
DVD satellite navigation and audio system with Dolby Prologic II
On board computer
AUX video input
Rear view camera
MODEL HISTORY
Flagship models celebrates 20th Anniversary
This year, the Subaru Legacy celebrates its 20th anniversary. Throughout its four previous generations, Subaru’s unique technologies, such as the AWD (All-Wheel-Drive) system paired with the Horizontally-Opposed (‘Boxer’) engine, have delivered a very special blend of driving performance, comfort, durability and safety.
As a result, up to the end of 2008, Legacy production had reached a total of over 3.6 million units (including the Outback model), while receiving high praise from media and public.
Now, as Subaru’s flagship model, the fifth-generation Legacy has been developed to pursue new directions for Subaru, setting new values worthy of the brand, as well as acknowledging the proud heritage that successive Legacy models have established.
First generation (from 1989) Striving for a world-class vehicle, development started with a goal of refining the Subaru driving experience. Legacy received high praise from users. | ![]() |
Second generation (from 1993) The original concept was retained, while performance was further improved. Along with upgrades to handling and styling, AWD driving performance and practicality were enhanced. | ![]() |
Third generation (from 1998) Qualities as a driver’s car were pursued to the utmost. Aiming to establish a flagship for truly global brand, key qualities such as safety performance were further refined. | ![]() |
Fourth generation (from 2003) With a focus on ‘emotional performance’, the car was widened and the overall design renewed, inside and out. Weight was reduced, and significant attention was paid to driving performance and environmental friendliness. | ![]() |
TECHNICAL SPECIFICATIONS
New Subaru Legacy Tourer
Body and Chassis
Five-door, five-seater estate, with all-steel unitary construction bodyshell. Choice of two longitudinally-mounted diesel and petrol boxer engines driving the front and rear wheels (AWD) via a six-speed manual or six-speed Lineartronic transmission – depending on model.
Engines
2.0-litre / 150 ps Diesel
Name Subaru Boxer Diesel
Type DOHC, horizontally opposed ‘flat four’, with VGT
Capacity 2.0-litres, 1,998 cc
Bore & Stroke 86.0 x 86.0 mm
Compression ratio 16.0:1
Max power 150 ps (110 kW) @ 3,600 rpm
Max torque 350 Nm (258.2 lbf.ft) @ 1,800-2.400 rpm
Valves 16 (4-per-cylinder)
Fuel system CRDi, common-rail, high pressure, direct injection
Turbo system Variable geometry turbocharger (VGT)
Construction Aluminium cylinder block and aluminium heads
Emissions class Euro Stage 5
2.5-litre / 167 ps Petrol
Name Subaru Boxer
Type SOHC, horizontally opposed ‘flat four’
Capacity 2.5-litres, 2,457 cc
Bore & Stroke 99.5 x 79.0 mm
Compression ratio 10.0:1
Max power 167 ps (123 kW) @ 5,600 rpm
Max torque 229 Nm (168.9 lbf.ft) @ 4,000 rpm
Valves 16 (4-per-cylinder)
Fuel system Multi-point injection
Construction Aluminium cylinder block and heads
Emissions class Euro Stage 5
Transmissions
2.0D 2.5i
Manual 6-sp -----
Automatic ----- Lineartronic
Gear Ratios
2.0D 2.5i
1 3.454:1 3.525:1
2 1.750:1 |
3 1.062:1 |
4 0.785:1 |
5 0.634:1 |
6 0.557:1 0.558:1
Reverse 3.636:1 2.358:1
Final Drive 1 4.111:1 3.700:1
Drivetrains
2.0D AWD with centre differential coupled to viscous LSD
2.5i AWD with active torque split system
Suspension & Damping
Front Fully independent by subframe-mounted MacPherson Struts, with coil springs and gas-filled shock absorbers. Anti-roll stabiliser bar.
Rear Fully independent by subframe-mounted Double Wishbones, coil springs and gas-filled shock absorbers, with self-levelling system (available on Outback only).
Steering
Type Electric power-assisted rack & pinion
Wheel 375 mm diameter, three-spoke leather trimmed.
Gearing 2.8 turns lock-to-lock
Turning circle 11.0 metres
Wheels & Tyres
2.0D S Alloy 16 in x 6.5J 205/60 R16 tyres
2.0D SE Alloy 18 in x 7.5J 225/45 R18 tyres
2.5i SE Alloy 18 in x 7.5J 225/45 R18 tyres
Spare (all models) Tyre mobility kit
DIMENSIONS (mm)
Exterior
Overall length 4775 Overall width 2052/1780*
Overall height 1535 Wheelbase 2750
Front track 1540 Rear track 1540
Front overhang 960 Rear overhang 1065
Ground clearance 150 *including/excluding door mirrors
Interior
Front Rear
Headroom 1024 951
Legroom 1091 960
Shoulder room 1430 1426
Hip room 1384 1370
Capacities (all models)
Fuel tank 65 litres
Luggage (VDA) 526 litres behind 2nd row seats
1677 litres behind 1st row seats
Weights (kg)
2.0D 2.5i
Curb weight (min.) 1558 1526
Gross weight 2075 2030
Towing (max) kg* 750 750 (unbraked trailer)
1700 1800 (braked trailer)
Performance
2.0D 2.5i
Top speed / mph 120 120
0-to-62 mph / sec 9.6 10.3
Fuel Economy (mpg)
2.0D 2.5i
Combined cycle 46.3 33.6
CO2 g/km 161 196
Subaru's Legacy Tourer, launched in 2009 gets a new addition to the family with the introduction of the new ES Nav.
The 2010 Subaru Legacy has been officially named 'Japan's safest car', after being awarded the Grand Prix 09/10 in Japan's New Car Assessment Programme (JNCAP).
This year marks the 20th anniversary of Subaru's flagship Legacy Tourer, and to celebrate, the marque has launched an all-new, fifth-generation version of its charismatic estate car.
I agree that all creative assets including but not limited to photos, logos, sketches, images and artwork are for
editorial use only. All commercial use of these creative assets, including but not limited to advertising,
marketing and merchandising, is strictly prohibited.